His projects are present in the most important art and design museums in the world. Furnishing your home and lighting it with Flos means bringing home a true work of art!

We use this page to show some of Philippe Starck's creations, the same ones you can find in the "Lighting" section by selecting the "Flos" brand.

In Vitro Unplugged

Lighting fixture for ground installation for outdoor use. Opal diffuser integrated in the head and aesthetic external protection glass in transparent borosilicate. The structural parts of the appliance are made of die-cast and extruded aluminum treated with a chemical conversion process in order to achieve an efficient resistance to atmospheric agents. The body is powder coated and available in various finishes.

Integrated LED light source with Edge Lighting optical technology to ensure perfect light uniformity. Portable version equipped with carrying handle. Dimmable driver 5/100 ÷ 240V / 50-60Hz integrated into the body of the luminaire with optical touch sensor on the head with adjustment of the light intensity in 4 dimming steps: 100% -50% -3% -OFF. Rechargeable via a 120 cm long Micro USB-C cable which guarantees continuous emission for up to 6 hours. IP20 charger with interchangeable EUR, UK, USA sockets. During the assembly and maintenance of the devices, special care must be taken not to damage the powder coating. Combined damage to the action of water could cause corrosion. Chemicals damage the corrosion protection

Bon Jour Versailles

Table lamp with diffused light. Diffuser and base in injection-molded transparent polymethylmethacrylate. Cover in metallized / painted ABS. Light source with Edge Lighting technology. Length of the power cable 200 cm, with dimmer that provides ON-OFF functions and regulation of 10-100% of the light. Plug-in power supply with interchangeable connectors

KTribe Table 2

Table lamp providing diffused light. Base, rod support and diffuser support in die-cast, polished and chrome-plated Zamak alloy. Base cover in black injection-molded PA (nylon). Internal diffuser in PC (polycarbonate) injection molded in opal color. The external diffusers are available in the versions: transparent or smoked made of PMMA (polymethylmethacrylate), and metallized gray or bronze on the internal surface using a vacuum aluminizing process. Upper ring in injection-molded PC (polycarbonate) completely transparent or transparent brown for the version with bronze metallic external diffuser

Miss K

Table lamp providing diffused light. Body in PMMA (polymethylmethacrylate) completely transparent injection molded; internal diffuser in PC (polycarbonate) opal injection molded and external diffuser in PC (polycarbonate) transparent or colored injection molded aluminized - on the entire surface - with vacuum aluminizing process inside

Romeo Moon Table 1

Lampada da tavolo a luce diffusa. Diffusore interno in vetro borosilicato pressato con finitura acidata. Diffusore esterno in vetro trasparente pressato. Base e supporto testa in lega di alluminio pressofuso, stelo di acciaio, tutti verniciati di colore grigio a liquido. Il supporto diffusore è in policarbonato trasparente stampato ad iniezione. Sul cavo è presente il dimmer elettronico Muvis che consente la regolazione a step dell'intensità luminosa ed il collegamento in radiofrequenza con il Flos Cubo

Bon Jour

Apparecchio di illuminazione da tavolo a luce diffusa. Base e diffusore in PMMA trasparente stampato ad iniezione. Fonte luminosa con tecnologia Edge Lighting. Cavo elettrico lunghezza utile 200 cm, con interruttore dimmer che garantisce le funzioni ON/OFF e regolazione del flusso luminoso 10-100%. Power supply su spina con plug intercambiabili.

Bon Jour Unplugged

Rechargeable table lamp with direct light. Base and top cover in ABS and finish by sputtering or painting. Diffuser and lampshade in injection-molded transparent PMMA. Light source with Edge Lighting technology. Autonomy of 6/24 hours, recharged via Micro-USB. Slide switch positioned under the base which guarantees the 4-step dimmer function. USB-C charging cable included in the package, useful length 120 cm. USB battery charger on plug with interchangeable plugs

Bibliotheque Nationale

Floor lamp providing diffused light. Base, rod support and diffuser support in chromed die-cast zamak. Base cover in galvanized P04 steel sheet. Internal diffuser and lamp holder support in injection-molded PC in opal color. The external diffusers are available in PVC coupled fabric, in injection-molded methacrylate with transparent, smoky gray finish, or in metallic gray or bronze on the internal surface using a vacuum aluminizing process. Upper ring in transparent injection-molded PC. Shelves in polished stainless steel. A USB socket positioned on the base allows the recharging of the most common smartphones and tablets (max 2A)

KTribe Floor 3

Floor lamp providing diffused light. Base, rod support and diffuser support in die-cast, polished and chrome-plated Zamak alloy. Base cover in galvanized PO4 steel sheet. Internal diffuser and lamp holder support in PC (polycarbonate) injection molded in opal color. The external diffusers are available in the versions: transparent or smoked made of PMMA (polymethylmethacrylate), and metallized gray or bronze on the internal surface using a vacuum aluminizing process. Upper ring in injection-molded PC (polycarbonate) completely transparent or transparent brown for the version with bronze metallic external diffuser. On the cable there is the electronic dimmer that allows the regulation of the light intensity in steps

Romeo Moon Floor

Floor lamp with diffused light. Internal diffuser in pressed borosilicate glass with acid-etched finish. External diffuser in transparent pressed glass. Base and head support in die-cast aluminum alloy, steel stem, all painted in liquid gray color. The diffuser support is in injection-molded transparent polycarbonate. On the cable there is the electronic dimmer that allows the regulation of the light intensity in steps

Rosy Angelis

Floor lamp with diffused light. Diffuser in ultralight fabric. Aluminum stems. Expanded polycarbonate lamp holder body.

Romeo Soft Floor

Floor lamp with diffused light. Internal diffuser in pressed borosilicate glass with acid-etched finish. External diffuser in pleated fabric. Base and head support in die-cast aluminum alloy, steel stem, all painted in liquid gray color. The diffuser support is in injection-molded transparent polycarbonate. On the cable there is the electronic dimmer that allows the regulation of the light intensity in steps

SuperArchimoon

Floor lamp with direct and diffused light. Internal diffuser in mouth blown borosilicate glass with acid-etched finish. External diffuser in pleated fabric. Speaker support in ground cast aluminum. Structure assembly, liquid painted in gray color, consisting of arms and tie rods in tubular aluminum, springs in stainless steel and joints in die-cast aluminum alloy. Base in ground cast aluminum, 6 lead counterweights and base cover in turned aluminum in gray liquid painted plate. On the cable there is the electronic dimmer that allows the regulation of the light intensity in steps

KTribe Wall

Wall-mounted lighting fixture with diffused light; a button located near the diffuser allows, by means of a "remote" dimmer, the adjustment of the light intensity on four levels. Cover rose in die-cast, polished and chrome-plated Zamak alloy. Arm and diffuser support in polished aluminum tubing. Wall attachment in pressed steel with galvanized finish. Internal diffuser in PC (polycarbonate) injection molded in opal color. The external diffusers are available in the versions: transparent or smoked made of PMMA (polymethylmethacrylate), and metallized gray or bronze on the internal surface using a vacuum aluminizing process. Upper ring in injection-molded PC (polycarbonate) completely transparent or transparent brown for the version with bronze metallic external diffuser

Romeo Babe Soft Wall

Diffused light wall luminaire. Internal diffuser in pressed borosilicate glass with acid-etched finish. External diffuser in pleated fabric. Diffuser support and lamp support in die-cast aluminum alloy, painted in liquid gray color. Wall attachment in injection-molded gray polycarbonate. Injection molded polycarbonate ceiling rose, liquid gray painted.

Romeo Babe Wall

Diffused light wall luminaire. Internal diffuser in pressed borosilicate glass with acid-etched finish. External diffuser in transparent pressed glass. Diffuser support and lamp support in die-cast aluminum alloy, painted in liquid gray color. Wall attachment in injection-molded gray polycarbonate. Injection molded polycarbonate ceiling rose painted in liquid gray color

KTribe Suspension 3

Suspension lamp with diffused light. Internal diffuser in PC (polycarbonate) with matt white finish. The external diffusers are available in the versions: transparent or smoked made of PMMA (polymethylmethacrylate), and metallized gray or bronze on the internal surface using a vacuum aluminizing process. Three suspension cables in stainless steel, useful length 4000 mm. White rose

La Plus Belle

La plus belle is a mirror with integrated lighting. The aluminum frame is available in various anodic finishes (shiny gold, shiny copper, shiny bronze, smoky brill) and houses a high color rendering LED source (CRI 95) and an opal opal silicone diffuser. The mirror, in 6mm extra-clear glass, has a safety and aesthetic film on the back and is fixed to the frame by means of a polycarbonate glazing bead. The La plus belle mirror hangs on the wall using an aesthetic hook integrated into the wall attachment and two magnets maintain its position. It can be powered as a wall light or via an IEC cable plug, and can be dimmed from 10% to 100% with control on the mirror via an optical sensor, or via 0 -10 / 1-10 V - PUSH - DALI remotely